Fixed heat detector ES Detect, Class B

Brand: Esser by Honeywell
Stock Status: Available
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a standard RJ45 Ethernet jack using the shield.
The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega (using the Ethernet library). You can access the on-board SD card slot using the SD library which is included in the current Arduino build.
The latest revision of the shield also includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up. The reset button on the shield resets both the W5100 and the Arduino board.
Arduino communicates with both the W5100 and SD card using the SPI bus (through the ICSP header). This is on digital pins 11, 12, and 13 on the Duemilanove and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5100 and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W5100 or the SD card, but it must be kept as an output or the SPI interface won't work.

System benefits:

Optimally matched to the ES Line system

With multisensor detectors for the detection of all fires, even under the most difficult operating conditions

Up to 30 detectors per detection group

Reliable detection:

Uniform response sensitivity of the detector for all different types of fire for the multisensor detectors

Large distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influences

Automatic adaptation to varying environmental influences

Electronic compensation also called drift-compensation of long-term influences of contamination or aging

Reliable false alarm suppression:

High reliability against false alarms by temporal evaluation of different sensor criteria, with built-in insect screen and sealed against rear air flow entry

Exclusion of signal forms not typical of fires through special filter algorithms

Automatic self-monitoring of the detector electronics

Automatic self-monitoring of sensors for function and condition


Designation of the heat detector by a black ring on the light pipe

Hours of operation, alarm and fault counter in each detector

Operation data retrieval of all detectors of a group with standard service PC and field bus interface

Detector LED for alarm display and as an identification display in the service (for maintenance with 8000 tools)

Wide range of accessories:

Standard socket and relay base

Socket adapter for ceiling installation

Dust caps optional for fire detectors and detector base

Kit for suspended mounting



There are yet no reviews for this product.

Get A Quick Quote

Send us an email by entering your details and any comments you may have in the form.

Warning: is_executable() []: open_basedir restriction in effect. File(/usr/bin/lame) is not within the allowed path(s): (C:/Inetpub/vhosts/\;C:\Windows\Temp\) in C:\Inetpub\vhosts\\httpdocs\securimage\securimage.php on line 1362
Play CAPTCHA Audio
Refresh Image
Chat or Call
Need help? We're here for you.