FACP ES Line for 8 zones

Brand: Esser by Honeywell
Stock Status: Available
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a standard RJ45 Ethernet jack using the shield.
The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega (using the Ethernet library). You can access the on-board SD card slot using the SD library which is included in the current Arduino build.
The latest revision of the shield also includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up. The reset button on the shield resets both the W5100 and the Arduino board.
Arduino communicates with both the W5100 and SD card using the SPI bus (through the ICSP header). This is on digital pins 11, 12, and 13 on the Duemilanove and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5100 and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W5100 or the SD card, but it must be kept as an output or the SPI interface won't work.


8 sensor groups with up to 32 sensors in each sensor group

Large LCD display with 8 rows x 40 characters

Integrated sensor group single display

Optimized commissioning, maintenance and operation

Simple configuration and programming on the keypad

Four relays, freely programmable, non-monitored, potential free, max. 30 V DC / 2 A or 60 V DC / 1 A

2 outputs for connecting acoustic or optical sounders according to EN 54-13 (29 V DC/ max. 500 mA)

1 interface to a transmission unit for fire warnings (12 V DC / max. 200 mA)

1 interface to a transmission unit for fault warnings (12 V DC / max. 200 mA)

1 standard interface extinguisher for fire control system type C according to DIN EN 54-2

RS485 for connecting to fire department operating panel and fire department display panel

1 output UBext 29 V / 0.5A, for power supply of external bus users

72 h emergency current bridge

“Delay of relaying” function (PM operating mode according to DIN VDE 0833-2 for preventing false alarms, delay / verify)

“2-detection dependency” function (TM operating mode according to DIN VDE 0833-2 for preventing false alarms), alternatively programmable as intermediate alarm storage or 2-zone dependency between the detector zones

Alarm counter for up to 10,000 trips

Event memory for up to 10,000 events



There are yet no reviews for this product.

Get A Quick Quote

Send us an email by entering your details and any comments you may have in the form.

Warning: is_executable() [function.is-executable]: open_basedir restriction in effect. File(/usr/bin/lame) is not within the allowed path(s): (C:/Inetpub/vhosts/sunmarsent.com\;C:\Windows\Temp\) in C:\Inetpub\vhosts\sunmarsent.com\httpdocs\securimage\securimage.php on line 1362
Play CAPTCHA Audio
Refresh Image
Chat or Call
Need help? We're here for you.